| Kisan PathBlazer Headlight Modulator P115W-A3 $115.53
This is a Dual Channel configuration. It is EXTERNALLY mounted and does not fit inside the headlight assembly.
P115W-A3-DHLdesigned for BMW motorcycles with an AMP 3-pin connector. This unit modulates ONLY the high beam while the low beam stays solid. This is possible because on most newer models, the lo-beam remains On when the hi-beam is turned On.
Side-by-side duals, triple bulbs or 4-plex arrangement - this unit is designed to give you the maximum conspicuity.
Unit is 1.0" (25.4mm) by 1.35" (34.4mm), and externally mounted. The matching AMP connector makes this a plug-n-play operation.
pathBlazer circuit modulates the hi-beam and lo-beam current - from 100% ON to about 17% OFF. This is accomplished by using a p-channel MOSFET, which is inherently safe. The MOSFET is designed to fail in the ON state. For additional safety, the circuits DO NOT utilize the lo-beam whatsoever!
MAX power rating is 115 watts. DO NOT EXCEED!
P115W-A3 comes with a detachable daylight sensor, which simply plugs into the pathBlazer. The daylight sensor functions as a switch; it stops modulation when it cannot see enough daylight. Since the internal circuitry is controlled by a microprocessor, it allows for customizable features.
|
